Muons, Airshowers, and Particle Detectors
A muon is an elementary particle. It has the same negative charge as an electron, but is roughly 207 times heavier. Because of its high mass, a muon is very unstable, and within a few microseconds will decay into electrons and neutrinos.
The muons which Cosmic Watch detects are products of cosmic showers: when a cosmic ray (a fast-moving particle from space, mostly accelerated by supernovae in the galaxy) collides with the nucleus of an air molecule, it starts a chain reaction in the atmosphere of subatomic particles and ionized nuclei. Some of these particles are muons, and because of their high energy, special relativity causes time dilation which allows them to live long enough from an observer’s point of view to reach Earth’s surface.
When a muon passes through the Cosmic Watch Detector, photons (light particles) are produced within the scintillator. These photons are detected by a silicon photo-multiplier (SiPM) attached to the scintillator, and the SiPM translates the light it receives into a voltage signal of proportionate strength. This creates a voltage pulse in the detector circuit, which if large enough, will be recorded by the device as an event.
Suggested Projects for Classrooms
This section is undergoing development; stay tuned for downloadable and interactive project notebooks (.ipynb format) which will guide students through possible projects using Python.
Under My Umbrella-ella-ella Ay Ay Ay: Elevation and Shielding Dependence
This project explores how the natural radiation background is impacted by the amount and nature of matter between the detector and space.
Ask questions like: what happens if I take this detector to the basement, a subway station, or the deepest place I can safely get to underground? What happens if I take this detector up a mountain, or lift it using a balloon and a long string on a calm day? What happens if I shield this detector, in my classroom, with different materials like concrete? Books? Massive lead-lined coffins (if you can find any)?
Compare the hit frequency of the resulting data between each scenario you test. Do you notice a difference between different elevations, or different shielding materials? Can you quantify that difference with numbers from your data? Can you visualize that difference by plotting your data?
Coincidence? I Think Not: Comparing Isolated and Coincident Detector Results
This project requires 2 detectors in coincidence mode.
This project compares results between a single Cosmic Watch detector taking data and two detectors connected with an ethernet cable in "coincidence mode".
Ask questions like: what event frequency do you measure when using a single detector? What frequency do you measure using only coincident events? Is there a difference in the energy of a coincident event and a non-coincident event? Are coincident events ever a different type of hit to the detector?
Compare the hit frequency of the resulting data between each scenario you test. What are some good ways to quantify the differences in results using numbers from your data? What are some informative ways you can communicate this visually with a graph?
Sonic the Muon: Measuring Muon Velocity
This project requires an oscilloscope and 2 detectors in coincidence mode. Additional information on methods and expected results for this experiment is available at the Cosmic Watch GitHub.
How fast are muons travelling?
Ask questions like: how do you define velocity? What parameter can you control, and what parameter do you need to measure to make a calculation of velocity in this situation? If you make two measurements of voltage pulse, where do you define the moment of muon "hit" to be for each?
Using the data you collect, how can you make a reliable estimate of muon velocity? How can you compare your results to what we expect? What would a good way to communicate your results qualitatively be? Quantitatively?
